Our
rental services allow you to try it before
you buy it; every item that we carry
on our retail line is also carried in
our rental fleet. Do you have a project
too big? Do you need more equipment for
the project you're working on? We have
what you need to get your job done. We
will even show you how to properly use
our equipment. Come in and rent what
you need from Tools for a Time today.
Small and powerful, the 300S is a vertical cylinder chain saw that revs up to 10,000 rpms with a 14 bar. The 28.5cc engine puts out 1.7 hp. Features include a full anti-vibration system, safety chain brake and a 3-shoe centrifugal clutch. Includes automatic oiler and has a dry weight of 8.8 lbs. Shindaiwa-built premium 2-cycle engine, Electronic ignition, Walbro WYM boot-mounted carburetor, USFS-approved spark arrestor muffler, Easy access air filter, Chrome-plated cylinder, High-impact glass filled nylon rear handle and recoil housing.
Basic
Specs
Horse Power: 1.7, Bar length (inches): 14, Weight (pounds): 8.8
The 357's 35.5cc high torque engine generates 1.8 hp and has a chrome cylinder and 2-ring piston. The top handle design and low weight, 8.9 lbs, make the 257 a must for tree care specialists. Other features include a throttle-lever extension, 14 bar & chain and nylon external housing. Includes automatic oiler and 257 climbing strap. Shindaiwa-built premium 2-cycle engine, USFS-approved muffler and spark arrestor, Easy-access air filter, Inertial chain brake, High-torque reed valve design, 2-ring piston, Turbo port air injection system, All position operation, Light weight construction, Ultra quiet, Full anti-vibration system, Chrome-plated cylinder.
Basic
Specs
Horse Power: 1.8, Bar length (inches): 12-16, Weight (pounds): 9.1
Shindaiwa's cutoff saw has the power to handle the toughest commercial jobs. Whether cutting concrete, masonry material, stone asphalt, iron, brick or steel, you'll appreciate the many professional features available on this saw. Its power comes from the large 73.5cc displacement, 4.9 hp engine and high torque transmission reduction system. The EC7600 comes standard with a 14 cutting wheel and Walbro butterfly carburetor with primer bulb for easy starting.
Great balance and light weight make this 35.2cc, 2.5 hp saw extremely easy to handle. This vertical cylinder chain saw weighs just 8.8 lbs. and comes with a 16 bar. Other features include a safety chain brake and full anti-vibration system as well as an automatic oiler. Shindaiwa-built premium 2-cycle engine, Electronic ignition, Externally-adjustable, boot-mounted Walbro WT carburetor, 3-shoe centrifugal clutch, Aluminum alloy front handlebar, Fully adjustable, automatic chain oiling pump, Chain catcher, Front and rear hand guards, 2-ring piston, High-impact nylon rear handles and recoil, USFS-approved spark arrestor muffler.
Basic
Specs
Horse Power: 2.5, Bar length (inches): 16, Weight (pounds): 8.8
Thanks to its longer displacement, the 377 has the kind of torque professionals need. Its 37.7cc engine generates 2.5 hp and has a 16 Pro-lite bar. The 377 is a vertical cylinder saw with professional features like double bar studs, Oregon chisel chain, 5-point anti-vibration system and improved air filter as well as automatic oiler. Shindaiwa-built premium 2-cycle engine, High-torque engine, 1-piece electronic ignition, Externally-adjustable, boot-mounted Walbro WT carburetor, 4-bolt muffler, Aluminum alloy front handle bar, Chain brake, Chain catcher, Hand guard, Rim-type sprocket, 2-ring piston design, USFS-approved spark arrestor muffler, High-impact nylon rear handle & recoil.
Basic
Specs
Horse Power: 2.5, Bar length (inches): 16, Weight (pounds): 9.0
The EC7500 is designed for a 12 wheel capacity, and the all new EC7600 is designed for a 14 wheel capacity. Whether cutting concrete,steel, brick, masonry, roofing tile, or stone, Shindaiwa cut-off saws have the power and performance to do the job.
Handy and powerful, the 488 chain saw's 47.9cc vertical cylinder engine generates 3.5 hp at 9,000 rpm. The 488 weighs in at just 10.1 lbs, has an 18 bar, electronic ignition and a Walbro diaphragm carburetor as well as an automatic oiler. Shindaiwa-built premium 2-cycle engine, USFS-approved spark arrestor muffler, 5-point anti-vibration system, Chain brake, High-torque engine, Ultra-high chain speed, Rubber-coated chain catcher, Hand guards, Rim-type sprocket, 2-ring piston, High-impact nylon rear handle and recoil housing 4-bolt muffler.
Basic
Specs
Horse Power: 3.5, Bar length (inches): 18, Weight (pounds): 10.1
With a 73.5cc engine generating 5.6 hp, the 757 is a real powerhouse. The 757 has a 28 bar and weighs 14.9 lbs. Other features include a safety chain brake, full anti-vibration system and an automatic oiler. Shindaiwa-built premium 2-cycle engine, Pressed-in bar studs, PowerPro Air filter system, Heavy-duty cooling, 1-piece electronic ignition, Externally-adjustable, boot-mounted Walbro HDA carburetor, Chain catcher, 2-ring piston, Outboard sprocket, High-impact nylon rear handle and recoil housing, USFS-approved spark arrestor muffler, Full wrap handlebar available.
Basic
Specs
Horse Power: 5.6, Bar length (inches): 28, Weight (pounds): 14.9
Small and powerful, the 300S is a vertical cylinder chain saw that revs up to 10,000 rpms with a 14 bar. The 28.5cc engine puts out 1.7 hp. Features include a full anti-vibration system, safety chain brake and a 3-shoe centrifugal clutch. Includes automatic oiler and has a dry weight of 8.8 lbs. Shindaiwa-built premium 2-cycle engine, Electronic ignition, Walbro WYM boot-mounted carburetor, USFS-approved spark arrestor muffler, Easy access air filter, Chrome-plated cylinder, High-impact glass filled nylon rear handle and recoil housing.
Basic
Specs
Horse Power: 1.7, Bar length (inches): 14, Weight (pounds): 8.8
The 357's 35.5cc high torque engine generates 1.8 hp and has a chrome cylinder and 2-ring piston. The top handle design and low weight, 8.9 lbs, make the 257 a must for tree care specialists. Other features include a throttle-lever extension, 14 bar & chain and nylon external housing. Includes automatic oiler and 257 climbing strap. Shindaiwa-built premium 2-cycle engine, USFS-approved muffler and spark arrestor, Easy-access air filter, Inertial chain brake, High-torque reed valve design, 2-ring piston, Turbo port air injection system, All position operation, Light weight construction, Ultra quiet, Full anti-vibration system, Chrome-plated cylinder.
Basic
Specs
Horse Power: 1.8, Bar length (inches): 12-16, Weight (pounds): 9.1
Shindaiwa's cutoff saw has the power to handle the toughest commercial jobs. Whether cutting concrete, masonry material, stone asphalt, iron, brick or steel, you'll appreciate the many professional features available on this saw. Its power comes from the large 73.5cc displacement, 4.9 hp engine and high torque transmission reduction system. The EC7600 comes standard with a 14 cutting wheel and Walbro butterfly carburetor with primer bulb for easy starting.
Great balance and light weight make this 35.2cc, 2.5 hp saw extremely easy to handle. This vertical cylinder chain saw weighs just 8.8 lbs. and comes with a 16 bar. Other features include a safety chain brake and full anti-vibration system as well as an automatic oiler. Shindaiwa-built premium 2-cycle engine, Electronic ignition, Externally-adjustable, boot-mounted Walbro WT carburetor, 3-shoe centrifugal clutch, Aluminum alloy front handlebar, Fully adjustable, automatic chain oiling pump, Chain catcher, Front and rear hand guards, 2-ring piston, High-impact nylon rear handles and recoil, USFS-approved spark arrestor muffler.
Basic
Specs
Horse Power: 2.5, Bar length (inches): 16, Weight (pounds): 8.8
Thanks to its longer displacement, the 377 has the kind of torque professionals need. Its 37.7cc engine generates 2.5 hp and has a 16 Pro-lite bar. The 377 is a vertical cylinder saw with professional features like double bar studs, Oregon chisel chain, 5-point anti-vibration system and improved air filter as well as automatic oiler. Shindaiwa-built premium 2-cycle engine, High-torque engine, 1-piece electronic ignition, Externally-adjustable, boot-mounted Walbro WT carburetor, 4-bolt muffler, Aluminum alloy front handle bar, Chain brake, Chain catcher, Hand guard, Rim-type sprocket, 2-ring piston design, USFS-approved spark arrestor muffler, High-impact nylon rear handle & recoil.
Basic
Specs
Horse Power: 2.5, Bar length (inches): 16, Weight (pounds): 9.0
The EC7500 is designed for a 12 wheel capacity, and the all new EC7600 is designed for a 14 wheel capacity. Whether cutting concrete,steel, brick, masonry, roofing tile, or stone, Shindaiwa cut-off saws have the power and performance to do the job.
Handy and powerful, the 488 chain saw's 47.9cc vertical cylinder engine generates 3.5 hp at 9,000 rpm. The 488 weighs in at just 10.1 lbs, has an 18 bar, electronic ignition and a Walbro diaphragm carburetor as well as an automatic oiler. Shindaiwa-built premium 2-cycle engine, USFS-approved spark arrestor muffler, 5-point anti-vibration system, Chain brake, High-torque engine, Ultra-high chain speed, Rubber-coated chain catcher, Hand guards, Rim-type sprocket, 2-ring piston, High-impact nylon rear handle and recoil housing 4-bolt muffler.
Basic
Specs
Horse Power: 3.5, Bar length (inches): 18, Weight (pounds): 10.1
With a 73.5cc engine generating 5.6 hp, the 757 is a real powerhouse. The 757 has a 28 bar and weighs 14.9 lbs. Other features include a safety chain brake, full anti-vibration system and an automatic oiler. Shindaiwa-built premium 2-cycle engine, Pressed-in bar studs, PowerPro Air filter system, Heavy-duty cooling, 1-piece electronic ignition, Externally-adjustable, boot-mounted Walbro HDA carburetor, Chain catcher, 2-ring piston, Outboard sprocket, High-impact nylon rear handle and recoil housing, USFS-approved spark arrestor muffler, Full wrap handlebar available.
Basic
Specs
Horse Power: 5.6, Bar length (inches): 28, Weight (pounds): 14.9
